高水平论文清单 | ||||
序号 | 名称 | 发表/刊物论文集 | 第一/通讯作者 | 发表/出版年份 |
1 | 基于损伤函数及典型线路工况组合的动车组车轮损伤预测方法 | 机械工程学报 | 肖乾 | 2025 |
2 | 道岔打磨对车轮磨耗下列车动力学影响 | 铁道工程学报 | 肖乾 | 2025 |
3 | A new nonlinear fatigue cumulative damage model based on load interaction and strength degradation | INTERNATIONAL JOURNAL OF FATIGUE | 肖乾 | 2025 |
4 | Numerical and experimental analysis of aluminum matrix composite brake disc performance for metro trains based on multiple physical field coupling | International Communications in Heat and Mass Transfer | 朱海燕 | 2025 |
5 | OBSTACLE AVOIDANCE PATH PLANNING FOR INTELLIGENT VEHICLES BASED ON SPARROW POTENTIAL FIELD IN MULTI-TYPE SCENARIOS | International Journal of Automotive Technology | 陈齐平 | 2025 |
6 | Study on the current-carrying friction and wear behaviors of a novel copper-impregnated carbon skateboard containing tungsten disulfide | Tribology International | 刘新龙 | 2025 |
7 | Optimization of three-layer staggered liquid cooling system for high-rate charging of large cylindrical battery module in electric vehicles | Applied Thermal Engineering | 刘霏霏 | 2025 |
8 | A novel battery thermal management system with air-liquid coupled cooling based on particle swarm optimization | Applied Thermal Engineering | 刘霏霏 | 2025 |
9 | Theoretical and experimental analysis of dynamic characteristics of a two-tube air spring with auxiliary reservoir | Mechanical Systems and Signal Processing | 秦武 | 2025 |
10 | Intelligent road surface state recognition method based on multi-layer attention residual network | Measurement Science and Technology | 秦武 | 2025 |
11 | Investigation of oxygen transport behavior in CZ silicon melt under different cusp magnetic field configurations | International Communications in Heat and Mass Transfer | 丁俊岭 | 2025 |
12 | Numerical investigation on the cooling performance of lithium-ion battery using liquid cooled-plate with integrated grooves and secondary microchannel structures | International journal of thermal sciences | 丁俊岭 | 2025 |
13 | Effect of crystal and crucible rotation on the melting and migration of silicon particles in their own melt during monocrystalline silicon growth via continuous Czochralski method | Physics of Fluids | 丁俊岭 | 2025 |
14 | Robust Adaptive Control of a Coaxial-Ducted-Fan Aircraft with Uncertainty Model | ELECTRONICS | 艾田付 | 2025 |
15 | Design and performance analysis of magnetorheological valve excited by inner and outer coils | PHYSICA SCRIPTA | 胡国良 | 2025 |
16 | A DDPG-based Path Following Control Strategy for Autonomous Vehicles by Integrated Imitation Learning and Feedforward Exploration | CHINESE JOURNAL OF MECHANICAL ENGINEERING | 刘前结 | 2025 |
17 | Fatigue reliability-based topology optimization of compliant mechanisms considering material uncertainties | Structural and Multidisciplinary Optimization | 占金青 | 2025 |
18 | Efficient surface reconstruction for SPH method and its application to simulation of solid-solid contact and fluid-rigid body interaction | ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS | 肖毅华 | 2025 |
19 | Design and development of a 3-DOF compliant gripper with in-plane and out-of-plane motion | Precision Engineering | 刘敏 | 2025 |
20 | Design, analysis and experiment of a compliant displacement amplification mechanism with large amplification ratio | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 刘敏 | 2025 |
21 | 考虑最小尺寸约束的内嵌可移动压电驱动柔顺机构拓扑优化设计 | 中国机械工程 | 刘敏 | 2025 |
22 | 一种双阻尼小波赋能的可解释卷积神经网络在轴承故障诊断中的应用 | 西安交通大学学报 | 张龙 | 2025 |
23 | An Investigation of the Effect of the Fault Degree on the Dynamic Characteristics and Crack Propagation of Rolling Bearings | APPLIED SCIENCES-BASEL | 张龙 | 2025 |
24 | A Self-Healing Structure Based on Monolayer Wall-Less Microvascular Network Carriers for Orthotropic Anisotropic Polymer Composites | Polymers | 李鹏 | 2025 |
25 | Dual-Scale Collaborative Optimization of Microtubule Self-Healing Composites Based on Variable-Angle Fiber Design | Materials | 李鹏 | 2025 |
26 | Integrating Multi-Scale Feature Sets with Vision Transformer for Enhanced Qualitative Discrimination Pear Browning of Visible-Near Infrared Spectroscopy | Food Analytical Methods | 郝勇 | 2025 |
27 | Rolling Bearing Fault Diagnosis Based on Fractional Constant Q Non-Stationary Gabor Transform and VMamba-Conv | Fractal and Fractional | 谢锋云 | 2025 |
28 | 基于多源信息融合的连续小波和TransXNet三相异步电机故障诊断 | 铁道科学与工程学报 | 谢锋云 | 2025 |
29 | Development of an internally cooled turning tool with built-in vortex tube for sustainable Ti-6Al-4V machining | JOURNAL OF MANUFACTURING PROCESSES | 舒盛荣 | 2025 |
30 | Impact of active chip breakers on Ti6Al4V turning process | MATERIALS AND MANUFACTURING PROCESSES | 舒盛荣 | 2025 |
31 | Experimental study on heat transfer characteristics of ultra-thin vapor chamber manufactured by laser technology | Thermal Science and Engineering Progress | 余九 | 2025 |
32 | Effect of laser ablation surface modification on the capillary performance of the wick structure for ultra-thin vapor chamber | INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 余九 | 2025 |
33 | A Hybrid GRA-TOPSIS-RFR Optimization Approach for Minimizing Burrs in Micro-Milling of Ti-6Al-4V Alloys | micromachines | 谭荣凯 | 2025 |
34 | A novel multiscale adaptive graph adversarial network for mechanical fault diagnosis | Knowledge-Based Systems | 刘家阳 | 2025 |
35 | Comparative study on wear and fatigue behaviors of rail steels with varying levels of martensite and bainite under rolling-sliding contact conditions | Wear | 沈明学 | 2025 |
36 | Achieving superior strength-ductility synergy in CoCrNi medium entropy alloy with a novel bionic brick-mud structure | Materials Research Letters | 胡剑 | 2025 |
37 | Engineering strength, ductility, and thermal stability in medium entropy alloys via controlled processing routes | Journal of Materials Processing Technology | 胡剑 | 2025 |
38 | Enhanced mechanical and electrochemical performance of CoCrNi medium entropy alloy through multi-scale heterostructure | Vacuum | 胡剑 | 2025 |
39 | Superior antibacterial activity of Cu-Ag co-doped nano-ZnO synthesized by one-step method | Materials Today Communications | 胡剑 | 2025 |
40 | Effect of the synergistic interaction of nanostructures with fluoride and silver ions on the antibacterial and osteogenic activity of Ti-0.5Ag alloy | Chemical Engineering Journal | 胡剑 | 2025 |
41 | Synergistic enhancement of mechanical, corrosion and antibacterial properties in gradient nanostructured 316L-Cu stainless steel | Applied Surface Science | 胡剑 | 2025 |
42 | Construction of Bacterial Cellulose Based Porous Integrated Tri-Layer Osteochondral Scaffold via Laser-Induced Method | Polymers Advanced Technologies | 张全超 | 2025 |
43 | Incorporating hydroxyapatite and micro-nano-fibrous structure into cardiovascular scaffold for improved hemocompatibility and endothelialization | Journal of Nanoparticle Research | 张全超 | 2025 |
44 | Fluorine ion implantation onto laser etched pyrolytic carbon surface for mechanically robust superhydrophobicity and improved hemocompatibility | Applied Surface Science | 张全超 | 2025 |
45 | AStable Subgridding 2D-FDTD Method for Ground Penetrating Radar Modeling | ACES Journal | 张晓燕 | 2025 |
46 | 一种增强主瓣指向性的波束形成方法 | 北京邮电大学学报 | 张晓燕 | 2025 |
47 | Connectivity Analysis for V2I Communications in Cognitive Vehicular Networks. | IEEE Transactions on Vehicular Technology/SCI二区top期刊 | 李轩 | 2025 |
48 |
| Neurocomputing | 舒文豪 | 2025 |
49 |
| Int. J. Mach. Learn. Cybern. | 舒文豪 | 2025 |
50 | 多分支特征提取的轻量化路面裂缝分割网络 | 交通运输工程学报 | 朱路 | 2025 |
51 | SCM-YOLO-P: lightweight feature re-focusing pavement defect detection model | Journal of Electronic Imaging | 朱路 | 2025 |
52 | 基于零值域分解的深度图像压缩感知重建 | 工程科学与技术 | 朱路 | 2025 |
53 | Intelligent on-demand inverse design of high-degree-of-freedom meta-atoms: multi-constraint-latent diffusion model and contrastive learning | Optics Express | 朱路 | 2025 |
54 | PTLOR-Net: Physical Transfer Learning Based Optical Response Prediction Network of Metasurfaces | ACS Photonics | 朱路 | 2025 |
55 | Thermo-Mechanical Coupling Characteristics and Computation of Stress Intensity Factor of High-Speed Train Brake Disc Under Wheel–Rail Excitation | International Journal of Computational Methods | 朱海燕 | 2024 |
56 | 轮轨激励对机车含裂纹齿轮接触特性及应力强度因子影响 | 交通运输工程学报 | 朱海燕 | 2024 |
57 | 内外激励下机车齿轮磨损仿真分析 | 交通运输工程学报 | 朱海燕 | 2024 |
58 | 轮轨激励对高速列车轴装制动盘热-机耦合疲劳分析 | 机械工程学报 | 朱海燕 | 2024 |
59 | Robust joint estimation of sideslip angle and tire lateral force for distributed drive electric vehicle | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 陈齐平 | 2024 |
60 | Study on vehicle state and tire–road friction coefficient estimation based on maximum correntropy generalized high-degree cubature Kalman filter | TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL | 陈齐平 | 2024 |
61 | Estimation of driving state and tire-road friction coefficient of distributed drive electric vehicles based on sensorless control of PMSM | Proceedinf Mechanical Engineers Part D: Journal of Automobile Engineerings of the Institution og | 陈齐平 | 2024 |
62 | Intelligent automobile path tracking control based on T-S fuzzy | Transactions of the Institute of Measurement and Control | 陈齐平 | 2024 |
63 | 融合前馈及状态反馈的智能汽车模型预测控制 | 湖南大学学报(自然科学版) | 陈齐平 | 2024 |
64 | Distributed Drive Electric Vehicle Sideslip Angle Estimation Based on the AVOA-MCSCKF Algorithm | Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering | 陈齐平 | 2024 |
65 | Multi-objective optimization design of electric vehicle in-wheel motor based on Taguchi method | Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering | 陈齐平 | 2024 |
66 | Study on multi-objective adaptive cruise control of intelligent vehicle based on multi-mode switching | Proceedings of ton of Mechanical Engineers Part D-Journal of Automobile Enginehe Institutiering | 陈齐平 | 2024 |
67 | Study on the effect of room temperature/low temperature environment on the electrical contact plug/pulling wear performance of different copper-based coated conductive connection terminals | Materials Letters | 刘新龙 | 2024 |
68 | An investigation of the electrical contact failure of JPT electric connectors used in automobiles under multiple stresses | Wear | 刘新龙 | 2024 |
69 | Comparative study of the current-carrying property of different copper-impregnated carbon skateboards/contact wires | Tribology International | 刘新龙 | 2024 |
70 | An investigation revealed the influence of the different magnitude and duration of the current-impact on the wear property to the carbon skateboard/stainless steel contact | Wear | 刘新龙 | 2024 |
71 | 不同电流下的电弧侵蚀对浸铜碳滑板/铬锆铜接触线磨损机理的影响 | 摩擦学学报 | 刘新龙 | 2024 |
72 | Study on the effect of different structural parameters on the wear mechanism in the anchor-segment joint of the rigid overhead catenary | Tribology International | 刘新龙 | 2024 |
73 | Effect of different gaps in the conductor rail joints on the current-carrying wear performance of carbon skateboards/conductive rail contact | wear | 刘新龙 | 2024 |
74 | Dynamic internal resistance modeling and thermal characteristics of lithium-ion batteries for electric vehicles by considering state of health | Journal of Power Sources | 刘霏霏 | 2024 |
75 | 基于串并对称式液冷流道的锂电池散热分析 | 湖南大学学报(自然科学版) | 刘霏霏 | 2024 |
76 | Research on the damage mechanism of the rolling contact fatigue of a wheel-rail contact system under the influences of surface defects | Engineering Failure Analysis | 陈道云 | 2024 |
77 | Influence of Axle Weight and Frequency on the Tribological Properties of Laser-Repaired 316L Stainless Steel Coatings in Railway Wheel Tread Braking | Coatings | 杨文斌 | 2024 |
78 | An improved model predictive control method for path tracking of autonomous vehicle considering longitudinal velocity | Journal of Vibration and Control | 秦武 | 2024 |
79 | Dynamic characteristics modeling and optimization for hydraulic engine mounts based on deep neural network coupled with genetic algorithm | Engineering Applications of Artificial Intelligence | 秦武 | 2024 |
80 | Vehicle Attitude Control of Magnetorheological Semi-Active Suspension Based on Multi-Objective Intelligent Optimization Algorithm | Actuators | 胡一明 | 2024 |
81 | Research on online optimization scheme and deployment of PMSM control parameters based on honey badger algorithm | SCIENTIFIC REPORTS | 胡一明 | 2024 |
82 | Study on Mathematical Models for Precise Estimation of Tire-Road Friction Coefficient of Distributed Drive Electric Vehicles Based on Sensorless Control of the Permanent Magnet Synchronous Motor | SYMMETRY-BASEL | 胡一明 | 2024 |
83 | Modelling and Control of Thermal Stress in TSLAG (Tb3Sc1.95Lu0.05Al3O12) Magneto-Optical Crystals Grown by Czochralski Method | crystals | 丁俊岭 | 2024 |
84 | Influence of particle parameters on the melting/migration of silicon particles and turbulent heat transfer during CCZ monocrystalline silicon growth | International Journal of Heat and Mass Transfer | 丁俊岭 | 2024 |
85 | 基于前馈神经网络的磁流变阀参数优化及性能研究 | 北京理工大学学报 | 胡国良 | 2024 |
86 | Design and performance analysis of a vibration energy harvesting magnetorheological damper | JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 胡国良 | 2024 |
87 | Trajectory tracking control of a four-bar linkage prosthetic knee with magnetorheological damper | JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 胡国良 | 2024 |
88 | NSGA-II-TLQR Control of Semi-active Suspension System with Magnetorheological Damper Considering Response Time Delay | Journal of Vibration Engineering ＆ Technologies | 胡国良 | 2024 |
89 | Analysis of braking performance and heat dissipation characteristics of multi-disc magnetorheological brake with an inner water-cooling mechanism | JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 胡国良 | 2024 |
90 | Analysis of pressure drop and response characteristics of an enhanced radial magnetorheological valve based on magneto-fluidic coupling | JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 胡国良 | 2024 |
91 | A Variable Horizon Model Predictive Control for Magnetorheological Semi-Active Suspension with Air Springs | SENSORS | 李刚 | 2024 |
92 | 分布式独立二次调压电液控制系统设计与仿真 | 农业机械学报 | 李刚 | 2024 |
93 | Design and evaluation of self-tuning optimal control for vibration suppression of magnetorheological semi-active suspension | Journal of Low Frequency Noise Vibration and Active Control | 李刚 | 2024 |
94 | Design and performance evaluation of a novel fractional order PID control strategy for vehicle semi-active suspension | ADVANCES IN MECHANICAL ENGINEERING | 李刚 | 2024 |
95 | Performance analysis of vehicle magnetorheological semi-active air suspension based on S-QFSMC control | FRONTIERS IN MATERIALS | 李刚 | 2024 |
96 | Experimental and numerical analysis of magnetorheological valve based on Herschel - Bulkley - Papanastasiou model | JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 朱文才 | 2024 |
97 | Effect of pitch ratio on the cavitation of controllable pitch propeller | Ocean Engineering | 朱文才 | 2024 |
98 | Design and experimental study of a semi-active shear-mode vibration absorber using magnetorheological elastomer | AIP ADVANCES | 刘前结 | 2024 |
99 | A Fractional-Order Model Predictive Control Strategy with Takagi-Sugeno Fuzzy Optimization for Vehicle Active Suspension System | FRACTAL AND FRACTIONAL | 刘前结 | 2024 |
100 | Development and Experimental Study of a Mixed-Mode Vibration Isolator Using Magnetorheological Elastomer | ACTUATORS | 刘前结 | 2024 |
101 | 基于区间非概率模型的热驱动柔顺机构可靠性拓扑优化 | 农业机械学报 | 占金青 | 2024 |
102 | Optimal design of electro-thermo-mechanical microactuators considering minimum length scale constraints | Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science | 占金青 | 2024 |
103 | 考虑最小尺寸控制的压力驱动柔顺机构拓扑优化设计 | 计算机集成制造系统 | 占金青 | 2024 |
104 | 基于等效静态载荷法的多相材料结构动态拓扑优化设计 | 振动与冲击 | 占金青 | 2024 |
105 | A Comparative Study on the Perforation Resistance of Nacre-Like, Layered, and Encased Ceramic/Polyurea Composite Plates Subjected to Low-Velocity Impacts by Differently Shaped Impactors | MECHANICS OF COMPOSITE MATERIALS | 肖毅华 | 2024 |
106 | 圆柱销-凹槽挤压式吸能结构的吸能特性和数值仿真研究 | 铁道科学与工程学报 | 肖毅华 | 2024 |
107 | Design and Analysis of a Moment of Inertia Adjustment Device | Machines | 曾礼平 | 2024 |
108 | Influence of temperature on dynamic contact characteristics of oil-jet lubricated rolling bearings | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS | 涂文兵 | 2024 |
109 | Influences of external moment on the contact characteristics of angular contact ball bearings under combined loads | INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS | 涂文兵 | 2024 |
110 | Multi-objective topology optimization of macro structure and microtubule network structure for self-healing material | Smart Materials and Structures | 李鹏 | 2024 |
111 | A novel autoencoder modeling method for intelligent assessment of bearing health based on Short-Time Fourier Transform and ensemble strategy | PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY | 郝勇 | 2024 |
112 | DBM-ViT: A multiscale features fusion algorithm for health status detection in CXR / CT lungs images | Biomedical Signal Processing and Control | 郝勇 | 2024 |
113 | 基于GMFDE与Singer-ELM的三相异步电机故障诊断 | 铁道科学与工程学报 | 谢锋云 | 2024 |
114 | 基于自适应变分模态分解的齿轮箱故障诊断 | 推进技术 | 谢锋云 | 2024 |
115 | Motor Fault Diagnosis Based on Convolutional Block Attention Module-Xception Lightweight Neural Network | ENTROPY | 谢锋云 | 2024 |
116 | Fault Diagnosis of Rolling Bearings in Agricultural Machines Using SVD-EDS-GST and ResViT | AGRICULTURE-BASEL | 谢锋云 | 2024 |
117 | Rolling Bearing Fault Diagnosis in Agricultural Machinery Based on Multi-Source Locally Adaptive Graph Convolution | AGRICULTURE-BASEL | 谢锋云 | 2024 |
118 | 改进时序灰度图和深度学习的齿轮箱故障诊断 | 计算机工程与应用 | 谢锋云 | 2024 |
119 | 基于GCN的多源变工况滚动轴承故障诊断 | 铁道科学与工程学报 | 谢锋云 | 2024 |
120 | Advancing Early Fault Diagnosis for Multi-Domain Agricultural Machinery Rolling Bearings through Data Enhancement | AGRICULTURE-BASEL | 谢锋云 | 2024 |
121 | Investigation of the nozzle arrangement effect on the performance of internal spray cooling turning tool | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 舒盛荣 | 2024 |
122 | Evolution mechanism of microstructure and microhardness of Ti–6Al–4V alloy during ultrasonic elliptical vibration assisted ultra-precise cutting | Journal of Materials Research and Technology | 谭荣凯 | 2024 |
123 | Denoising Diffusion Implicit Model Combined with TransNet for Rolling Bearing Fault Diagnosis Under Imbalanced Data | Sensors | 刘家阳 | 2024 |
124 | Solidification and tribological behaviors of CoCrFeNiSi0.5-(Al,Ti) non-equiatomic high entropy alloy coatings fabricated by directlaser deposition | Surface & Coatings Technology | 唐延川 | 2024 |
125 | Rapid inverse design of high degree of freedom meta-atoms based on the image-parameter diffusion model | IEEE/OSA Journal of Lightwave Technology | 朱路 | 2024 |
126 | 一种增强主瓣指向性的波束形成方法研究 | 北京邮电大学学报 | 张晓燕 | 2024 |
127 | Role of geometrically necessary dislocations on the superior damping capacity and high strength-ductility of 5083Al/SUS405 laminated heterostructure composites | Materials Letters | 唐延川 | 2024 |
128 | 激光沉积贝氏体/马氏体复相超高强钢组织性能研究 | 中国激光 | 唐延川 | 2024 |
129 | The effect of temperature on the current-carrying tribological behevior of C/Cu contact pairs in high humidity environments | Tribology Letters | 沈明学 | 2024 |
130 | Tribological properties of copper-matrix composites against laser-cladded Co06 coating on 30CrMoSiVA steel at elevated temperatures | Tribology International | 沈明学 | 2024 |
131 | 选择性激光熔化技术制备的Cu-10Sn合金的载流摩擦学性能 | 润滑与密封 | 沈明学 | 2024 |
132 | Promoting grain refinement and nanocrystal generation in surface nanomachining by means of overlapping collisions | Tribology International | 沈明学 | 2024 |
133 | Current-carrying tribological behavior of C/Cu contact pairs in extreme temperature and humidity environments for railway catenary systems | Science China-Technological Sciences | 沈明学 | 2024 |
134 | Label distribution feature selection based on label-specific features | Applied Intelligence | 舒文豪 | 2024 |
135 | Multi-label feature selection for missing labels by granular-ball based mutual information | Applied Intelligence | 舒文豪 | 2024 |
136 | Neighborhood relation-based incremental label propagation algorithm for partially labeled hybrid data | Machine Learning | 舒文豪 | 2024 |
137 | Incremental feature selection based on uncertainty measure for dynamic interval-valued data | International Journal of Machine Learning and Cybernetics | 舒文豪 | 2024 |
138 | Multi-label feature selection via spectral clustering-based label enhancement and manifold distribution consistency | International Journal of Machine Learning and Cybernetics | 舒文豪 | 2024 |
139 | Nonlinear Model and Experimental Verification of Bistable Hybrid Energy Harvester Based on Wheel–Rail Vibration. | J. Vib. Eng. Technol. | 董文涛 | 2024 |
140 | Flexible self-powered triboelectric nanogenerator sensor for wind speed measurement driven by moving trains | Flexible and Printed Electronics | 董文涛 | 2024 |
141 | Multivariate variational mode decomposition and 1D residual neural network for subtle feature recognition of rolling bearings | Journal Mechanical Science and Technology | 董文涛 | 2024 |
142 | Monitoring and evaluation of high-speed railway turnout grinding effect based on field test and simulation | APPLIED SCIENCES-BASEL | 肖乾 | 2023 |
143 | High-temperature tribological properties of coatings repaired by laser additive manufacturing on railway wheel tread damage | wear | 肖乾 | 2023 |
144 | 高速铁路焊接区轮轨动力学响应及疲劳分析 | 铁道工程学报 | 林凤涛 | 2023 |
145 | 车轮凹磨特征指数对车辆运行性能影响分析 | 铁道科学与工程学报 | 林凤涛 | 2023 |
146 | Design Method of Worn Rail Grinding Profile for the Curve Section | Transportation Research Record | 林凤涛 | 2023 |
147 | 道岔辙叉区磨耗车轮动力学分析及摩擦因数影响 | 铁道科学与工程学报 | 林凤涛 | 2023 |
148 | Review of research on the influence of vibration and thermal fatigue crack of brake disc on rail vehicles | Engineering Failure Analysis | 朱海燕 | 2023 |
149 | 牵引电机悬挂参数对高速列车牵引传动部件振动特性的影响 | 交通运输工程学报 | 朱海燕 | 2023 |
150 | Regenerative braking control strategy based on pavement recognition controller for electric vehicle | Energy Technology | 陈齐平 | 2023 |
151 | Anti-slip regulation method for electric vehicles with four in-wheel motors based on the identification of slip ratio | Transactions of the Canadian Society for Mechanical Engineering | 陈齐平 | 2023 |
152 | AFS control system research of distributed drive electric vehicles by adaptive super-twisting sliding mode control | Transactions of the Institute of Measurement and Control | 陈齐平 | 2023 |
153 | Slip ratio adaptive control for distributed drive electric vehicle based on wheel speed | Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering | 陈齐平 | 2023 |
154 | Study on multi-closed loop control of electro-mechanical braking for electric vehicles based on clamping force | Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering | 陈齐平 | 2023 |
155 | Clamping force control strategy of electro-mechanical brake system using VUF-PID controller | Actuators | 陈齐平 | 2023 |
156 | Research on torque ripple optimization of permanent magnet synchronous motor for electric vehicle based on modular poles | IEEJ Transactions on Electrical and Electronic Engineering | 陈齐平 | 2023 |
157 | Parallel parking path planning based on improved arctangent function optimization | International Journal of Automotive Technology | 陈齐平 | 2023 |
158 | Study the influence of power-current impact with different conditions on the current-carrying wear property of carbon brush/friction disc contact | Tribology International | 刘新龙 | 2023 |
159 | Study on the wear properties of conductive terminals with different coatings at low temperatures | MATERIALS LETTERS | 刘新龙 | 2023 |
160 | A comparative investigation into the material matching performance of different friction pairs under current-carrying friction | Tribology International | 刘新龙 | 2023 |
161 | Influence of different arc erosion durations on the wear properties of carbon skateboards/contact wires under low temperature | WEAR | 刘新龙 | 2023 |
162 | Comparative study of the current-carrying tribological properties of carbon graphite composites with different hardnesses | International Journal of Mechanical Sciences | 刘新龙 | 2023 |
163 | 动力吸振器应用于车辆悬架系统的NVH控制 | 振动.测试与诊断 | 刘霏霏 | 2023 |
164 | Cooling characteristics of a lithium-ion battery module based on flat aluminum heat pipe by considering thermal radiation | Energy Science ＆ Engineering | 刘霏霏 | 2023 |
165 | Thermal characteristics of Li‐ion battery based on phase change material-aluminum plate-fin composite heat dissipation | Energy Science ＆ Engineering | 刘霏霏 | 2023 |
166 | Optimal design of liquid cooling structure with bionic leaf vein branch channel for power battery | Applied Thermal Engineering | 刘霏霏 | 2023 |
167 | Fatigue reliability evaluation of heavy-haul locomotive car body underframe based on measured strain and virtual strain | International Journal of Fatigue | 陈道云 | 2023 |
168 | Dynamic and electrical damping of deep spherical sandwich shells with electrorheological fluid core and FG-GPLRC skins | European Journal of Mechanics - A/Solids | 陈道云 | 2023 |
169 | Simulation examining the factors influencing capillary wick transport in a refrigerant direct cooling system for power battery packs | Scientific Reports | 曾建邦 | 2023 |
170 | 基于动态k值K-means++聚类的电动汽车动力电池 电压不一致故障识别方法 | 中国科学：技术科学 | 曾建邦 | 2023 |
171 | Investigation of the Microstructure and Wear Properties of Conventional Laser Cladding and Ultra-High-Speed Laser Cladding Alloy Coatings for Wheel Materials | Coatings | 杨文斌 | 2023 |
172 | ER9车轮材料激光熔覆层微观组织及性能研究 | 中国激光 | 杨文斌 | 2023 |
173 | ER8车轮钢激光熔覆涂层在酸雨环境下的磨损与腐蚀性能分析研究 | 表面技术 | 杨文斌 | 2023 |
174 | Design, analysis and optimization of a hybrid fluid flow magnetorheological damper based on multiphysics coupling model | Mechanical Systems and Signal Processing | 胡国良 | 2023 |
175 | Braking performance and temperature characteristics analysis of parallel multi-channel magnetorheological brake | International Journal of Applied Electromagnetics and Mechanics | 胡国良 | 2023 |
176 | High-Precision and Modular Decomposition Control for Large Hydraulic Manipulators | ACTUATORS | 李刚 | 2023 |
177 | Semi-active fuzzy cooperative control of vehicle suspension with a magnetorheological damper | JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES | 李刚 | 2023 |
178 | 高压水下湿法焊接电弧等离子体介质击穿机制 | 焊接学报 | 李志刚 | 2023 |
179 | Design and analysis of marine propeller with new blade sections | AIP Advances | 朱文才 | 2023 |
180 | 基于等几何分析的电热驱动柔顺机构拓扑优化设计 | 机械工程学报 | 占金青 | 2023 |
181 | 基于摄动法的周期性多孔结构稳健性拓扑优化设计 | 铁道科学与工程学报 | 占金青 | 2023 |
182 | 考虑输出刚度不确定性的柔顺机构拓扑优化设计 | 农业机械学报 | 占金青 | 2023 |
183 | FEM-SPH coupling approach for impact response analysis of composite plates with brick-and-mortar structure | International Journal of Computational Methods | 肖毅华 | 2023 |
184 | Penalty based surface to surface contact algorithm for SPH method | Applied Mathematical Modelling | 肖毅华 | 2023 |
185 | 3D surface-to-surface contact algorithm for SPH method and its application to simulation of impact failure of ceramic plate | Applied Sciences-Basel | 肖毅华 | 2023 |
186 | 基于半圆型波纹周期梁的柔顺恒力机构优化设计 | 农业机械学报 | 刘敏 | 2023 |
187 | The influence of race waviness on skidding characteristics of rolling bearings | International Journal of Non-Linear Mechanics | 涂文兵 | 2023 |
188 | A dynamic model of defective bearing considering the detailed motion of the roller and the impact between the roller and the cage | Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics | 涂文兵 | 2023 |
189 | 载荷波动工况下滚动轴承接触特性分析 | 振动与冲击 | 涂文兵 | 2023 |
190 | Motion stability analysis of cage of rolling bearing under the variable-speed condition | Nonlinear Dynamics | 涂文兵 | 2023 |
191 | 基于滑移非理想赫兹接触的滚动轴承振动特性分析 | 振动与冲击 | 涂文兵 | 2023 |
192 | 基于卷积注意力长短时记忆网络的轴承寿命预测方法 | 控制理论与应用 | 周建民 | 2023 |
193 | 基于MSET重构模型整体优化的轴承性能退化评估方法 | 振动与冲击 | 张龙 | 2023 |
194 | 基于概率切片累积特征的轴承双向传感器信息融合故障诊断 | 计算机集成制造系统 | 张龙 | 2023 |
195 | 改进共空间模式与多源特征融合的轴承智能诊断方法 | 西安交通大学学报 | 张龙 | 2023 |
196 | Multilevel Feature Extraction Method for Adaptive Fault Diagnosis of Railway Axle Box Bearing | Shock and Vibration | 张龙 | 2023 |
197 | 多通道信息融合与深度迁移学习的旋转机械故障诊断 | 中国机械工程 | 张龙 | 2023 |
198 | 自适应频域字典的机车轮对轴承稀疏诊断方法 | 铁道科学与工程学报 | 张龙 | 2023 |
199 | Bearing fault-induced feature enhancement via adaptive multi-band denoising model | Measurement Science And Technology | 张龙 | 2023 |
200 | 显式动力学驱动的轴承变工况故障诊断方法 | 中国机械工程 | 张龙 | 2023 |
201 | 采用递归图编码技术与残差网络的滚动轴承故障诊断 | 西安交通大学学报 | 张龙 | 2023 |
202 | Sparse representation by novel cascaded dictionary for bearing fault diagnosis using bi-damped wavelet | The International Journal of Advanced Manufacturing Technology | 张龙 | 2023 |
203 | Improving prediction model robustness with virtual sample construction for near-infrared spectra analysis | Analytica Chimica Acta | 郝勇 | 2023 |
204 | Research on defect detection method of bearing dust cover based on machine vision and multi-feature fusion algorithm | Measurement Science and Technology | 郝勇 | 2023 |
205 | Online Inspection of Browning in Yali Pears Using Visible-Near Infrared Spectroscopy and Interpretable Spectrogram-Based CNN Modeling | Biosensors-Basel | 郝勇 | 2023 |
206 | The Early Diagnosis of Rolling Bearings’ Faults Using Fractional Fourier Transform Information Fusion and a Lightweight Neural Network | Fractal Fract | 谢锋云 | 2023 |
207 | Research on Three-Phase Asynchronous Motor Fault Diagnosis Based on Multiscale Weibull Dispersion Entropy | Entropy | 谢锋云 | 2023 |
208 | Optimizing and Analyzing Performance of Motor Fault Diagnosis Algorithms for Autonomous Vehicles via Cross-Domain Data Fusion | Processes | 谢锋云 | 2023 |
209 | Rolling Bearing Fault Diagnosis Based on SVD-GST Combined with Vision Transformer | Electronics | 谢锋云 | 2023 |
210 | Intelligent Fault Diagnosis of Variable-Condition Motors Using a Dual-Mode Fusion Attention Residual | Journal of Marine Science and Engineering | 谢锋云 | 2023 |
211 | Gearbox Fault Diagnosis Based on Multi-Sensor Deep Spatiotemporal Feature Representation | Mathematics | 谢锋云 | 2023 |
212 | Research on a Rolling Bearing Fault Diagnosis Method Based on Multi-Source Deep Sub-Domain Adaptation | Applied Sciences-Basel | 谢锋云 | 2023 |
213 | Gearbox Fault Diagnosis Method Based on Multidomain Information Fusion | Sensors | 谢锋云 | 2023 |
214 | 基于自适应TQWT与小波包奇异谱熵的滚动轴承早期故障诊断 | 铁道科学与工程学报 | 谢锋云 | 2023 |
215 | Unveiling orientation dependence of anisotropic plasticity in polycrystalline copper by nanoindentation | nanotechnology | 谭荣凯 | 2023 |
216 | Analytical modelling and experimental study of surface roughness in ultrasonic elliptical vibration assisted ultra-precision cutting of Ti-6Al-4 V alloy | International Journal of Advanced Manufacturing Technology | 谭荣凯 | 2023 |
217 | Design of a New Balanced Side Slotted Vivaldi Antenna with Director using Genetic Algorithm | ACES Journal | 张晓燕 | 2023 |
218 | Design of a Reconfigurable Band-notched Wideband Antenna using EBG Structures | ACES Journal | 张晓燕 | 2023 |
219 | 表面微纳结构和化学修饰对润湿性影响的研究进展 | 中国表面工程 | 沈明学 | 2023 |
220 | 钢轨表面堆焊区滚动接触疲劳损伤特性 | 机械工程材料 | 沈明学 | 2023 |
221 | Different responses of wheel-rail interface adhesion and wheel surface damage induced by wheel tread out–of–roundness | Wear | 沈明学 | 2023 |
222 | Mechanical and Tribological Behaviors of U75VG Rail | Lubricants | 沈明学 | 2023 |
223 | 表面机械滚压处理（SMRT）T2紫铜的载流摩擦学行为研究 | 中国有色金属学报 | 沈明学 | 2023 |
224 | 暖湿气流对不同服役温度下轮轨界面黏着与损伤的响应行为研究 | 摩擦学学报 | 沈明学 | 2023 |
225 | Different responses of wheel-rail interface adhesion and wheel surface damage induced by wheel tread out–of–roundness | 2023 | 沈明学 | 2023 |
226 | Impact Wear Behavior of HVOF-Sprayed WC-10Co-4Cr Coating on Medium Carbon Steel Under Controlled Kinetic Energy | Journal of Thermal Spray Technology | 刘少鹏 | 2023 |
227 | Effect of kinetic energy on impact wear properties of HVOF sprayed WC-10Co-4Cr coating and medium carbon steel | Journal of Materials Engineering and Performance | 刘少鹏 | 2023 |
228 | Investigation on Sliding Tribological Properties of Laser Cladding Alloy Coating for Subway Wheels | Coatings | 肖乾 | 2022 |
229 | Design method of worn rail grinding profile based on Frechet distance method | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT | 林凤涛 | 2022 |
230 | 过度磨耗钢轨的打磨廓形设计方法 | 交通运输工程学报 | 林凤涛 | 2022 |
231 | 曲线区钢轨双打磨廓形设计方法 | 铁道科学与工程学报 | 林凤涛 | 2022 |
232 | Design and analysis of the dual motor coupling drive system for electric vehicle | International Journal of Vehicle Design | 陈齐平 | 2022 |
233 | Study on reducing cogging torque and core loss of in-wheel motor for electric vehicle based on stator full-slot offset | International Journal of Vehicle Design | 陈齐平 | 2022 |
234 | Ultrasonic inspection of curved structures with a hemispherical-omnidirectional ultrasonic probe via linear scan SAFT imaging | NDT ＆ E International | 陈齐平 | 2022 |
235 | Safety Study of High-Speed Collisions between Trains and Live Intruder | Sensors | 张海 | 2022 |
236 | 轮轨接触几何非线性对车辆动力学性能的影响 | 铁道科学与工程学报 | 张海 | 2022 |
237 | Influence of Humidity on Endurance of Electrical Contact during Fretting Wear | Journal of Materials Engineering and Performance | 刘新龙 | 2022 |
238 | 翅片参数对热管式动力电池模组散热性能的影响 | 湖南大学学报(自然科学版) | 刘霏霏 | 2022 |
239 | Constraint-Based Adaptive Robust Control for Active Suspension Systems Under the Sky-Hook Model | IEEE Transactions on Industrial Electronics | 秦武 | 2022 |
240 | Fuzzy set theory for optimal design in controlling underactuated dynamical systems with uncertainty | Journal of Vibration and Control | 秦武 | 2022 |
241 | Three-dimensional characteristics of turbulent flow and heat transfer in Czochralski silicon melt with different cusp magnetic field configurations | Physics of Fluids | 丁俊岭 | 2022 |
242 | Design and performance evaluation of a magnetorheological valve with mosquito-coil-plate fluid flow channels | Sensors and Actuators A: Physical | 胡国良 | 2022 |
243 | Geometric optimization and performance analysis of radial MR valve using Taguchi orthogonal experiment method | Journal of Mechanical Science and Technology | 胡国良 | 2022 |
244 | Optimal Design and performance analysis of magnetorheological damper based on multiphysics coupling model | Journal of Magnetism and Magnetic Materials | 胡国良 | 2022 |
245 | 基于关节力矩补偿的液压机械臂末端力软测量 | 华南理工大学学报.自然科学版 | 李刚 | 2022 |
246 | Effect of contra-rotating propeller boss cap fins (CRPBCF) on the performance of marine propellers | Ocean Engineering | 朱文才 | 2022 |
247 | An improved mesh refinement method to study the tip vortex cavitation of a marine propeller | Ships and Offshore Structures | 朱文才 | 2022 |
248 | 基于多性能约束的连续体结构拓扑优化设计 | 计算机集成制造系统 | 占金青 | 2022 |
249 | Multi-material topology optimization of large-displacement compliant mechanisms considering material-dependent boundary condition | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | 占金青 | 2022 |
250 | 考虑混合约束的柔顺机构拓扑优化设计 | 振动与冲击 | 占金青 | 2022 |
251 | Application of normalized SPH method to inviscid fluid flows with large deformation of free surface | Computers ＆ Fluids | 肖毅华 | 2022 |
252 | An effective smoothing length updating method for smoothed particle hydrodynamics | International Journal of Computational Methods | 肖毅华 | 2022 |
253 | Multi-Material Topology Optimization of Flexure Hinges Using Element Stacking Method | Micromachines | 刘敏 | 2022 |
254 | 计及间隙和转矩滞回变化的双质量飞轮冲击特性及动态响应分析 | 振动与冲击 | 曾礼平 | 2022 |
255 | Modeling and vibration characteristics analysis of a DMF rotor system | Journal of Mechanical Science and Technology | 曾礼平 | 2022 |
256 | 变工况下滚动轴承保持架碰撞接触动力学特性分析 | 振动与冲击 | 涂文兵 | 2022 |
257 | 考虑滚动轴承故障处塑性变形的有限元建模与动力学特性分析 | 西安交通大学学报 | 涂文兵 | 2022 |
258 | Fuzzy Broad Learning System Combined with Feature Engi-neering Based Fault Diagnosis for Bearing | Machines | 周建民 | 2022 |
259 | Deep Residual Network Combined with Transfer Learning Based Fault Diagnosis for Rolling Bearing | Applied Sciences-Basel | 周建民 | 2022 |
260 | Numerical Model Driving Multi-Domain Information Transfer Method for Bearing Fault Diagnosis | Sensors | 张龙 | 2022 |
261 | An Imbalanced Fault Diagnosis Method Based on TFFO and CNN for Rotating Machinery | Sensors | 张龙 | 2022 |
262 | Multiple Enhanced Sparse Representation via IACMDSR Model for Bearing Compound Fault Diagnosis | Sensors | 张龙 | 2022 |
263 | 采用显式动力学的轴承性能退化评估指标构建 | 西安交通大学学报 | 张龙 | 2022 |
264 | 动力学小波字典驱动的轴承故障个性化稀疏诊断 | 电子测量与仪器学报 | 张龙 | 2022 |
265 | Novel FEM-Based Wavelet Bases and Their Contextualized Applications to Bearing Fault Diagnosis | Machines | 张龙 | 2022 |
266 | 基于卷积门控循环网络的齿轮箱故障诊断 | 吉林大学学报(工学版) | 张龙 | 2022 |
267 | Sensor distribution optimization for composite impact monitoring based on AR model and LPP | Machines | 李鹏 | 2022 |
268 | 基于无壁型微脉管的光能损伤自修复复合材料 | 材料导报 | 李鹏 | 2022 |
269 | Establishment of online deep learning model for insect-affected pests in “Yali” pears based on visible-near-infrared spectroscopy | Frontiers in Nutrition | 郝勇 | 2022 |
270 | Research on construction method and validity mechanism of robust analysis model in snow peach quality detection based on visible-near infrared spectroscopy | Frontiers in Nutrition | 郝勇 | 2022 |
271 | Study on robust model construction method of multi-batch fruit online sorting by near-infrared spectroscopy | Spectrochimica Acta Part A-Molecular And Biomolecular Spectroscopy | 郝勇 | 2022 |
272 | Research on the Gearbox Fault Diagnosis Method Based on Multi-Model Feature Fusion | Machines | 谢锋云 | 2022 |
273 | Investigation of Surface Integrity of Selective Laser Melting Additively Manufactured AlSi10Mg Alloy under Ultrasonic Elliptical Vibration-Assisted Ultra-Precision Cutting | Materials | 谭荣凯 | 2022 |
274 | A Difference Subgridding Method for Solving Multiscale Electro-Thermal Problems, ACES Journal | ACES Journal | 张晓燕 | 2022 |
275 | Role of ambient temperature in the adhesion and damage characteristics of wheel/rail interface during rolling-sliding contact | Wear | 沈明学 | 2022 |
276 | New insights into reducing airborne particle emissions from brake materials: Grooved textures on brake disc surface | Tribology International | 沈明学 | 2022 |
277 | 车轮踏面不圆顺对高速列车轮轨界面黏着与车轮表面损伤的影响 | 中国机械工程 | 沈明学 | 2022 |
278 | Connectivity Probability Analysis for Green Cooperative Cognitive Vehicular Networks | IEEE Transactions on Green Communications and Networking | 李轩 | 2022 |